The Accu-Miter 24-46 has a rigid 24″ front fence with a telescopic inner rail that extends to 46″. Equipped with a micro-adjusting stop, the adjustable Accu-Bar, and a tapered shot pin system, this miter gauge is the ultimate tool for making accurate cuts.
The unique shot pin feature allows you to quickly select and accurately achieve angles of 15, 22.5, 30, 45 and 90. The spring loaded shot pin locates into openings with extreme accuracy; accuracy you can count on! This means no more time consuming trial and error set up. You get it right the first time! The Accu-Miter’s tapered shot pin mechanism assures dead-on accuracy year after year. The maximum margin of error is one minute, 43 seconds. That’s less than 1/30 of a degree!
With the Accu-Miter, you’ll achieve accurate multiple cut-offs quickly and precisely! You no longer have to try to cut on a pencil line. Just use the micro adjust flip stop on the outer rail fence or the end stop on the telescoping inner rail fence. When using the micro adjusting stop on the outer rail fence, the maximum cut is 24″. When using the telescoping inner rail end stop, the maximum cut is 46″.
The Accu-Miter comes with a bar that can be adjusted to perfectly fit your table saw. To adjust the bar to fit your saw’s groove, simply insert the bar into the saw groove and slide it back and forth while checking for side-to-side movement. If the movement is excessive, adjust the bar’s width by turning each screw 1/4 turn at a time using the 1/8 allen wrench provided. The bar is adjusted when it slides freely in the saw groove and has a minimum of side-to-side movement.
The Accu-Miter is a quality built miter gauge that will give you years of dependable service, and it comes with a full one-year warranty against all defects in workmanship or materials. So go ahead and try a different angle….a Perfect angle!
- Shot-pin accuracy for 90º, 45º, 30º, 22 1/2º and 15º angles.
- Precise protractor scale for less frequently-used angles.
- Rigid 24″ front fence with a telescopic inner rail that extends to 46″.
- Adjustable end stops for crosscuts.
- Multi-position locking handles.
- Adjustable bar for the perfect fit to your table saw.
- Durable, die-cast construction with raised graduations.
- Micro adjust flip stop.