With more features and more performance, JDS is raising the bar for 2-stage Cyclone Dust Collection.
The JDS 3HP Cyclone is one of the highest performing 3HP Cyclones in the industry. The TEFC motor has an aluminum housing that keeps it cooler and helps it run more efficiently. The “Turbo-Fan” impeller provides 2300 CFM and a max static pressure of 16.2”. This gives the collector the ability to provide great suction even when placed under high amounts of resistance resulting in a powerful central collector that can handle a heavy duty shop environment.
The Cyclone comes with a Radio Frequency (RF) remote control with timer function. The remote can work through walls so you can control the unit even if it is located in an adjacent room. Removing the 55 gallon steel drum is quick and easy, just lift up the drum lid levers and slide out the drum. The drum is on wheels and has a window on the side so you can see how much dust you are creating and when you need to empty the drum. The “Bag Gripping Frame” will allow disposable bags to be used in the drum. The frame will keep the bag shape in the negative pressure environment.
The JDS 3HP Cyclone has a one micron efficient canister to ensure that fine dust doesn’t get back into the shop. The self cleaning canister filter is equipped with its own motor that automatically turns on when the cyclone is turned off. The motor will rotate “flappers” around the inside of the canister knocking off any dust that forms on the inside of the filter.
Keep your shop clean with JDS High Performance Dust Collectors.
- Compact Cyclone design allows for a 55 gallon collection system while still standing only 86 inches tall!
- Radio Frequency Remote Control.
- The self cleaning 1 Micron Canister is equipped with its own motor.
- New and Improved “Turbo Fan” impeller is larger, resulting in more Power!
- 2300 Max CFM!!!
- Quick connect drum lid lever makes removing the steel collection drum quick and easy!
- The 3 HP Cyclone is now portable!!
The JDS Cyclone uses a steel “Turbo-Fan” impeller. This type of impeller uses two disks that are connected by a series of “fins”. The lower disk has an opening the same diameter as the internal cylinder of the cyclone.
How it works:
Air and dust travel into the cyclone through the 8″ port and cycle around the internal cylinder of the cyclone. Dust and chips then funnel down through the cone and into the collection drum. Air and fine dust then travel up through the internal cylinder directly into the center of the Turbo-Fan.
The two disk design of the Turbo-Fan transfers the airflow from the center of the impeller out to the edges. This creates a power that enables the impeller to produce higher levels of cfm when the cyclone dust collector is placed under higher amounts of resistance.
To see how a Turbo-Fan performs under different amounts of resistance, a performance curve is generated. A performance curve compares airflow to resistance. Airflow is measured in cubic feet per minute (CFM) and resistance is measured in static pressure (inches of water).
When no resistance is placed against the 3HP cyclone dust collector the maximum cfm is 2300. As the static pressure increases the cfm levels gradually decrease.
Most dust collectors on the market have zero cfm at 12″ of static pressure, the JDS 3HP Cyclone produces 1000 cfm!
Quick Connect Drum Levers:
Disposing of collected waste is quick and easy! Just lift up the drum levers and slide the steel drum out. Return the drum and lock down the levers, its that easy!
Self Cleaning Canister:
The JDS Cyclones are equipped with a 1 micron canister that is self cleaning. Every time the unit is turned off a signal is sent to the canister motor that activates cleaning “flappers” inside the canister!
The JDS Cyclones have a base with wheels that allow the cyclones to be transported anywhere!
The unique “Turbo-Fan” impeller from JDS now provides more CFM and greater performance at high levels of static pressure. The TEFC motors with aluminum housings run cooler and more efficiently.
RF Remote Control:
The (RF) remote control with timer function can work through walls so you can control the unit even if it is located in an adjacent room!
Drum Bag Gripper:
Disposable bags can be used in the drum with the Bag Gripping Frame. The Frame fits inside the plastic bag and keeps that bag shape in the negative pressure inside the drum.