|
Items in your Cart: 0
Items in your Cart: $0.00
|
|
|
Multi-Router
The Ultimate Joinery Machine
| The Multi-Router, by JDS Company, is the ultimate joinery machine for small shops. If its face frames, doors, or drawers, in the custom cabinet shop, the Multi-Router can handle these tasks with surprising ease. For the custom furniture maker it is the Dream Machine that can produce difficult angled and compound angle tenons and mortises in seconds. |
The two most time consuming phases of most woodworking projects are sanding and joinery. With the Multi-Router in your shop you can significantly reduce the amount of time and energy that you spend on joinery. Not only will you be able to increase your efficiency and productivity, but you will also improve the quality of your joinery. Think about it: Accurately centered, precision fitting, mortise and tenons; Dovetails that fit together like a dream; Box joints that assemble with ease and accuracy.
If that is not enough, how about angled and compound angled joinery? It's a snap with the Multi-Router. Tedious tasks can now be reduced to quick and easy procedures. Seconds is all it takes. As one proud owner stated: "The Multi-Router easily does the difficult!!"
The Multi-Router is a precision built, high quality tool that is designed to give you years and years of accurate, dependable service. Thomson linear bearings insure smooth precision movement for your most delicate operations, yet will stand up to the test of day-long production runs. |
$2,695.00
|
Custom furniture makers and cabinetmakers will absolutely love the versatility of The Multi-Router. So, go ahead, be creative; be innovative. Remember: "The Multi-Router easily does the difficult!!"
A unique system of templates and ball bearing-tipped stylus enables you to quickly and accurately produce a wide variety of dimensionally sound precision joints. Seconds is all it takes to create mortises, tenons, box joints, dovetails, even angled and compound angled joinery. The optional pneumatic clamps offer even quicker results for short production runs. The quality of construction and the versatility of the Multi-Router make for a truly remarkable and rewarding woodworking experience.
|
See the Multi-Router in Action!
Click the "Watch Videos" button to see the Multi-Router cut complex woodworking joints in seconds!
To see the full 30 minute instructional DVD click here.
Multi-Router Manual (PDF)
View a digital pdf version of our manual.
|
|
| Websites of Interest: |
| Check out the site of David Marks, host of DIY's Woodworks! |
 |
| |
|
| Highland Woodworking is a long time dealer of JDS Products! |
 |
|
Here
are some Joints that can be produced using the Multi-Router
|
|
|
Mortise
& Tenon |
Compound
Angle Tenon |
Dovetail |
|
|
|
Box
Joint |
Miter
Joint with Floating Stub Tenon |
Sliding
Dovetail |
|
|
|
Round
Tenon |
Double
Mortise & Tenon |
Decorative
Joints |
How it Works!
The
Multi-Router system of templates, traced by a ball bearing stylus is an
accurate and uncomplicated method of producing woodworking joints. The ball
bearing stylus simulates the exact movements of the router bit and the template
simulates the exact movements of the piece of wood. Following the template
while cutting enables you to produce any type of joint accurately and consistently.
Such consistency can not be found with any other machine. Such consistency
is vital for producing identical pieces, such as chairs for a dining set.
|
 |
Two Template Systems
For Making Tenons
STANDARD TEMPLATES
The Standard
Template System is recommended when the woodworker utilizes a dimensionally
accurate cutting bit. The Standard Template System consists of fourteen
different sized tenon templates.
|
|
STANDARD TEMPLATE SIZES
Tenon
Size |
Width |
1/4 |
1,
1-1/2, 2, 2-1/2,
3 |
3/8 |
1,
1-1/2, 2, 2-1/2,
3 |
1/2 |
1-1/2,
2, 2-1/2, 3 |
VARIABLE SIZE TEMPLATES
Variable
size templates are used to compensate for dimensionally inaccurate
cutting bits. Undersized cutting bits may be caused by sharpening the
bit, or by inaccuracies in the original size of the bit. The Variable
Size Template System consists of fourteen different sized tenon templates.
Each tenon size comes with a set of three inserts marked "A",
"B", and "C". A complete system of all of the sizes
below contains 42 inserts and 1 master holder.
The woodworker selects the size insert that is needed, attaches it to
the master, and makes the desired tenon. Of the three sizes "A"
is on dimension, "B" will produce a tenon .010 smaller than
"A", and "C" will produce
a tenon .010 smaller than "B." This will give you a tremendous
amount of flexibility if you sharpen your bits, or if you machine different
species of wood. |
 |
VARIABLE TEMPLATE SIZES
Tenon
Size |
Width |
1/4 |
1,
1-1/2, 2, 2-1/2,
3 |
3/8 |
1,
1-1/2, 2, 2-1/2,
3 |
1/2 |
1-1/2,
2, 2-1/2, 3 |
OTHER TEMPLATES
 |
In addition
to tenon templates, there are five different sized circular tenon templates:
1/2, 5/8, 3/4, 1, 1 1/4. Also available is a dovetail set, and a 3/8 or
1/4 box joint template. Other size templates are available on special order.
We will be happy to help you with your special needs. |
The quality of construction and the compact design of the Multi-Router make it the ideal machine for small shops who are looking for a dependable, durable, machine that will stand up to years of daily use.
|
YOU HAVE TO SEE IT TO BELIEVE IT! The only way to really appreciate the Multi-Router is to see it in action! For a deposit of $20.00, we will send you a video that demonstrates the capabilities of this woodworking wonder. Return the tape and your money will be quickly refunded. If you buy the Multi-Router, we will refund your deposit and the video remains yours! Click HERE to buy the Multi-Router Video. (available in DVD or VHS format)
- Click Here to learn more about the advantages of Titanium coated bits.
|
- Precision HSS cutting bits - double fluted, spiral up-cut, end mills, available in a variety of sizes and lengths. Buy Replacement Cutting Bits for your Multi-Router Here!
|
- Constructed of heavy aluminum castings.
- Computer controlled machining of all parts.
- Three axis operation: X Axis-8 inches, Y Axis-8 inches, and Z Axis-6 inches.
- Precision Linear bearings and hardened steel rods.
- Adjustable stop collars.
|
- Gas cylinder counter balance to offset the weight of the router.
- Removable locator pins on work surface table.
- Chip deflector.
- Work table tilts to a full 45 degrees.
- Accurate scale for height selection of Z axis.
- Designed to accommodate most routers.
|
To Purchase the JDS Multi-Router call 800.480.7269 for a dealer near you.
To Purchase accessories click HERE. |
|
|
|
|