Items in your Cart:
0
Current Subtotal:
$0.00
  |
|
Master Insert Holder (For Variable Size Template Inserts)
|
Item Number: 10702
|
The Master Insert Holder is used to hold the different size tenon insert sets. The same Master Holder is used to hold any of the tenon inserts. The advantages to this system are that you only need one template and when you need a different size, just swap out the inserts. The inserts also come in three differnt versions of the tenon size, to compensate for variations in your bit and your wood.
|
Variable
size templates are used to compensate for dimensionally inaccurate
cutting bits. Undersized cutting bits may be caused by sharpening the
bit, or by inaccuracies in the original size of the bit. The Variable
Size Template System consists of fourteen different sized tenon templates.
Each tenon size comes with a set of three inserts marked "A",
"B", & "C".
The woodworker selects the size insert that is needed, attaches it to
the master, and makes the desired tenon. Of the three sizes "A"
is on dimension, "B" will produce a tenon .010 smaller than
"A", and "C" will produce
a tenon .010 smaller than "B." This will give you a tremendous
amount of flexibility if you sharpen your bits, or if you machine different
species of wood.
|
 |
|
|
|
|