|
Other Items from 3 HP Dust-Force
1 Micron bag Kit for JDS Dust Force - The 1 Micron bag kit is for the JDS Dust-Force 1.5 hp dust collector. The kit comes with a 1 micron upper bag and one clear plastic bottom bag. This kit will filter the dust particles collected down to 1 micron in size.
5-Pack Plastic Bag Kit for JDS Dust-Force - 5-Pack of replacement bottom bags for the JDS Dust-Force 1.5 hp dust collector. The bags are a 7 mil rugged plastic that provide a 42 gallon capacity. The clear plastic lets you see how much you're collecting and when to change bags.
Dust Force 1 Micron Canister Kit - The 1 Micron Canister kit will fit the JDS Dust-Force 1.5HP and 3HP models. The canister has a larger surface area allowing better airflow while still trapping 1 micron size particles. The cleaning handle will rotate flappers on the inside of the canister knocking off any accumulated dust.
Dust Collection Hose Kit - The JDS Dust Collection Hose Kit includes one 4-inch by 10-foot flexible hose and two hose clamps. Our hose is strong, flexible, and durable. The flexibility allows you to position the hose exactly where you want. This Kit is perfect for connecting JDS Dust Collectors to different woodworking tools and equipment.
5 Micron bag Kit for JDS Dust Force - The 5 Micron bag kit is for the JDS Dust-Force 1.5 hp dust collector. The kit comes with a 5 micron upper bag and one clear plastic bottom bag. This kit will filter the dust particles collected down to 5 microns in size.
Dust-Gate Start-Up Kit 220V - The JDS 220-Volt Dust-Gate Start-Up Kit saves steps, time and energy. This kit is designed to turn on your dust collector when you open the Dust-Gate to a wood-working machine, and turn off your dust collector when the gate is closed. The switches on all Dust-Gates are wired to the Central Control Box in parallel so that when any of your gates are opened, the dust collector turns on. If several gates are open, the dust collector will not turn off until all gates are closed. The low-voltage switches in the system activate a Central Control Box that turns on the dust collector. Simply plug the Central Control Box into the proper electrical outlet, and then plug the dust collector into the Control Box. This dust-gate easily installs onto a 4-inch dust collector hose or pipe.
3HP Dust Force 2500 CFM Dust Collector - The JDS 3HP Dust-Force is the perfect dust collector for shops that require powerful performance as well as versatility. This portable collector can easily be rolled to a convenient location or it is powerful enough to remain stationary as a central collection system. Two collection bags will reduce the down time associated with the disposal of collected dust and debris, and two 1 micron bags assure that only clean air will be returning into the shop. A unique air-flow adjustment knob will assure that both collector bags will receive equal amounts of collected “dust”. The 13” impeller provides 2500 CFM of pulling power and is powered by a 220V, single phase, 3 HP motor. The motor is totally enclosed and has thermal overload protection, so it will stand up to the day long demands of the hard working small shop environment. The dust collector has an 8” inlet which is ideal for central system ductwork or three 4” openings for direct to the source collection hoses. The 3HP Dust-Force is the perfect combination of power, performance, and convenience.
Dust-Gate Expansion Kit - The JDS Dust-Gate Expansion Kit saves steps, time and energy. This kit is designed to turn on your dust collector when you open the Dust-Gate to a wood-working machine, and turn off your dust collector when the gate is closed. The switches on all Dust-Gates are wired to the Central Control Box in parallel so that when any of your gates are opened, the dust collector turns on. If several gates are open, the dust collector will not turn off until all gates are closed. The low-voltage switches in the system activate a Central Control Box that turns on the dust collector. Simply plug the Central Control Box into the proper electrical outlet, and then plug the dust collector into the Control Box. This dust-gate easily installs onto a 4-inch dust collector hose or pipe.
|
